Wet bathroom floors are one of the most common causes of slips at home — for children, seniors, and anyone in a hurry. This Non-Slip Shower Mat addresses that directly. The textured TPE surface provides a secure grip underfoot, dozens of suction cups anchor it firmly to any smooth shower or bath surface, and drainage holes prevent water from pooling underneath. It stays put when you step on it, resists mold and mildew, and takes seconds to clean.
Why This Mat Stands Out
✓ Strong suction cup base — dozens of powerful suction cups grip firmly to smooth shower floors, bathtub surfaces, and wet room floors. Press down once and it stays in place
✓ Textured anti-slip surface — raised pattern on the top surface provides grip underfoot even when wet and soapy. Reduces the risk of slipping in the shower or bath
✓ Drainage holes throughout — open design allows water to flow through freely, preventing pooling underneath and helping the mat dry faster between uses
✓ TPE material — Thermoplastic Elastomer construction is free from PVC and BPA, resists mold and mildew, and does not retain odours
✓ 2 sizes available — Small (38 × 70 cm) for standard showers, Medium (43 × 75 cm) for larger shower trays or bathtubs
✓ 4 colour options — Gray, Pink, Green, and Blue to match your bathroom colour scheme
✓ Safe for all ages — suitable for households with young children, elderly family members, or anyone who needs extra stability on wet surfaces
✓ Easy to clean — rinse under the tap, machine wash, or wipe down. Dries quickly due to the open drainage design
Where to Use It
→ Shower tray — the primary use. Sits flat on any smooth shower floor and anchors securely under foot pressure
→ Bathtub — place inside the bath before filling for secure footing when standing or bathing children
→ Wet room floor — the drainage design works especially well in open wet room formats where water flows across the whole floor
→ Children's bath time — gives children a non-slip standing surface and makes bath time safer and less stressful for parents
→ Elderly and mobility use — extra grip underfoot reduces the risk of slipping for anyone with reduced balance or mobility
→ Shared bathrooms — a simple, hygienic safety addition to any household bathroom regardless of age
How It Works
1 — Suction cup anchoring: The underside of the mat is covered with dozens of individual suction cups. When pressed firmly against any smooth, wet, or dry surface, they create a vacuum seal that holds the mat in place under foot pressure. The mat does not slide or lift at the edges during normal use.
2 — Textured grip surface: The top surface has a raised texture pattern that provides friction against bare feet even when covered in water, soap, or shampoo. This is the key contact point that prevents slipping.
3 — Drainage and airflow: The open holes throughout the mat allow water to drain through to the floor rather than sitting on top of the mat. This keeps the surface drier and reduces the risk of mold or mildew developing underneath.
Non-Slip Shower Mat vs Other Bathroom Safety Options
|
This Mat ✓ |
Anti-Slip Strips |
Standard Bath Mat |
| In-shower use |
Yes — suction cups hold in place ✓ |
Yes — adhered to floor |
Outside shower only |
| Removable |
Yes — lifts off easily ✓ |
Permanent — hard to remove |
Yes |
| Drainage |
Open holes — fast drainage ✓ |
N/A — strips only |
Absorbs water — stays wet |
| Mold resistance |
TPE — mold resistant ✓ |
Can discolour over time |
Can develop mold if not dried |
| Size options |
Small + Medium ✓ |
Fixed width strips |
Various sizes available |
| Colour options |
Gray · Pink · Green · Blue ✓ |
Clear or limited colours |
Many colours available |
How to Install and Use
- Clean and dry the shower or bath surface where the mat will be placed
- Unroll the mat with suction cups facing down toward the floor
- Press firmly across all areas of the mat to activate the suction cups
- Step onto the mat — it should feel secure and stable underfoot immediately
- After each shower or bath, lift the mat by one edge and hang to air dry
- Clean weekly by rinsing under the tap or placing in the washing machine
Tip: For the strongest suction hold, make sure both the mat and the shower floor are free of soap residue before pressing down. Soap film between the suction cups and the floor reduces grip. A quick rinse of the floor before placing the mat helps significantly.
Care and Maintenance
✓ Rinse under warm water after each use and hang to dry — do not leave sitting flat on the floor when not in use
✓ Machine washable on a gentle cycle with mild detergent — do not use bleach or harsh chemical cleaners
✓ If suction cups lose grip over time, clean both the mat underside and the shower floor with a mild soap solution and rinse thoroughly before reapplying
✓ Hang to air dry fully before rolling for storage — do not store damp or folded tightly for long periods
Product Specifications
|
|
| Material |
Thermoplastic Elastomer (TPE) — PVC-free · BPA-free |
| Small size |
38 × 70 cm (approx. 15 × 27.5 in) · weight approx. 400g |
| Medium size |
43 × 75 cm (approx. 17 × 29.5 in) · weight approx. 520g |
| Colour options |
Gray · Pink · Green · Blue |
| Surface |
Textured anti-slip top · suction cup base · drainage holes throughout |
| Compatible surfaces |
Smooth shower trays · bathtubs · wet room floors |
| Cleaning |
Rinse · machine washable (gentle cycle) |
| In the box |
1 × Non-slip shower mat (size and colour as selected) |
What's Included
- 1 × Non-slip shower mat (Small or Medium · colour as selected)