Your pool stays dark and static while everyone else has moved on to colour-changing underwater lights you control from your chair. These submersible pool lights put 16 colour modes and 4 dynamic effects in your hand via a 24-key remote — no getting up, no reaching into the water, no fuss.
Why It Stands Out
✓ 16 static colours + 4 dynamic modes — red, green, blue, white, yellow, purple and colour combinations, all switchable in seconds from the included 24-key remote.
✓ IP68 waterproof rating — fully submersible construction withstands full immersion so lights perform reliably underwater in pools, ponds, and aquariums.
✓ Sinks and stays in place — the weighted body settles naturally on the bottom; the included bi-sucker (suction mount) lets you fix it to glass or smooth surfaces.
✓ 10 bright LEDs per unit — spread light evenly in every direction for consistent colour coverage without dark spots.
✓ Battery-powered, no wiring needed — runs on 3 × AAA batteries so placement is completely flexible with no cables to manage.
✓ CE certified — meets European safety standards for electrical and electromagnetic compliance.
Where to Use These Pool Lights
Submerge them in a pool, pond, or fountain for vivid underwater colour. Drop one into an aquarium or fish tank for accent lighting. Place inside a vase or centrepiece for events. Use at Halloween, Christmas, weddings, and pool parties — anywhere you want controllable colour without cords or installation.
How the Remote Control Works
The 24-key infrared remote controls the lights from up to 8 metres away in open air. When the light is submerged, the effective range reduces to approximately 1 metre through water — point the remote toward the water surface above the light for the most reliable response. The remote uses a CR2025 button battery, which is included. The lights use 3 × AAA batteries (not included); high-quality alkaline batteries are recommended, as lower-quality batteries can cause the unit to float rather than sink.
Comparison Table
| Feature |
These Pool Lights |
Standard Submersible Lights |
| Colour modes |
16 static + 4 dynamic |
Typically 1–3 static |
| Remote included |
Yes — 24-key infrared |
Often no remote |
| Waterproof rating |
IP68 |
Often IP65 or lower |
| Mounting options |
Weighted sink + bi-sucker |
Usually suction only |
| Remote battery |
CR2025 included |
Not always included |
| Certification |
CE certified |
Not always certified |
Setup and Placement
Twist the battery compartment open (marked OPEN/CLOSE on the base), insert 3 × AAA alkaline batteries, and close securely. Insert the CR2025 battery into the remote. Place the light where you want it — it sinks and rests on the bottom on its own, or attach the bi-sucker to fix it to a smooth glass surface. Point the remote at the light or at the water surface above it when submerged, and use the 24-key pad to select your colour or mode.
Care and Storage
Rinse with clean water after use in chlorinated or salt water and allow to dry before storing. Do not force the battery compartment — turn to the OPEN mark before opening. Remove the AAA batteries for long-term storage to prevent corrosion. Keep the remote dry as it is not waterproof. Store in a cool, dry place away from direct sunlight.
Product Specifications
| LED Count |
10 LEDs per unit |
| Diameter × Height |
7 cm × 3 cm |
| Colour Modes |
16 static + 4 dynamic |
| Remote Type |
24-key infrared |
| Remote Range |
~8 m in air / ~1 m in water |
| Power |
2W |
| Voltage |
4.5V |
| Waterproof Rating |
IP68 |
| Power Source |
3 × AAA batteries (not included) |
| Remote Battery |
1 × CR2025 (included) |
| Mounting |
Weighted sink + bi-sucker |
| Certification |
CE |
What's in the Box
- 2 / 4 / 6 × Submersible LED Pool Lights (quantity based on pack selected)
- 2 / 4 / 6 × Bi-sucker Mounts (quantity based on pack selected)
- 1 × Remote
