Wiring outdoor lighting is a weekend project. These solar ground lights are a ten-minute one. Push the spike into the soil, switch to ON, and they charge all day and light up automatically at night — no wiring, no electrician, no ongoing cost. Available in Warm White and Cold White, in packs of 4, 8, or 12 to light an entire pathway, driveway edge, or garden border in one order.
Why These Ground Lights Stand Out
✓ IP68 waterproof rated — fully sealed against rain, heavy moisture, and outdoor weather conditions. Designed for permanent year-round outdoor placement including Canadian rain and snow
✓ Automatic dusk-to-dawn operation — the intelligent light sensor activates the LED ring automatically at dusk and switches off at dawn. No manual switching required after initial setup
✓ 14-LED ring illumination — 14 × 2835 LED beads arranged in a ring around the solar panel produce an even, circular glow that illuminates the ground around each light
✓ 8 hours runtime per full charge — the 300mAh nickel-hydrogen battery stores a full day's solar energy for up to 8 hours of nightly illumination
✓ Low-profile disc design — the flat round body sits close to the ground, making it visible as a light source without protruding above path surfaces or garden borders
✓ Two light colour options — Warm White for a cosy amber tone and Cold White for a crisp daylight tone — select the atmosphere that suits your outdoor space
✓ Three pack sizes — 4-pack for a small path or accent border, 8-pack for a medium driveway or garden walkway, 12-pack for a full pathway or large garden layout
✓ No wiring or electricity required — fully solar powered, zero running cost after installation

Where to Use Them
→ Garden pathway — space evenly along both sides of a garden path for a lantern-lit walkway effect at night
→ Driveway edge — line along a driveway border to mark the edge and provide low ambient lighting
→ Lawn or flower bed border — place around the perimeter of a garden bed for decorative border lighting
→ Steps and deck edges — position at step edges or deck borders for low-level ambient lighting
→ Gravel or rock garden — the disc design sits naturally among gravel and stone without looking out of place
→ Front yard — space along a front path from gate to door for a welcoming entrance at night
How It Works
1. Solar charging — the polycrystalline silicon solar panel on the top surface absorbs sunlight during daylight hours and charges the 300mAh battery. A full charge takes 6+ hours of direct sunlight
2. Automatic activation — the integrated light sensor detects when ambient light drops at dusk and automatically switches on the LED ring, illuminating the surrounding ground area
3. Adaptive brightness — when the battery is fully charged the light operates at full brightness. As the battery level decreases through the night, the light gradually dims to extend runtime through to dawn

|
These Solar Ground Lights |
Wired Path Lights |
Solar Stake Lanterns |
| Waterproof rating |
✓ IP68 |
Varies |
Varies |
| Wiring required |
✓ None |
✗ Yes |
✓ None |
| Automatic operation |
✓ Dusk-to-dawn sensor |
Manual or timer |
Usually yes |
| Ground profile |
✓ Low disc — flush look |
Raised stake |
Raised stake |
| Pack options |
✓ 4 / 8 / 12 |
Sold individually |
Usually individual |
| Running cost |
✓ Zero — fully solar |
Electricity cost |
✓ Zero |

How to Install
1. Push the switch on the underside of each light to the ON position before inserting the ground spike
2. Insert the two ground spikes into the round holes on the underside of the light body
3. Push the assembled light firmly into the soil at your chosen location
4. Position in an area that receives direct sunlight on the top solar panel during the day
5. The light will activate automatically at dusk on the first night — allow a full day of charging before first use for maximum runtime
Tip: For a pathway, space lights approximately 24–36 in (60–90 cm) apart on alternating sides of the path for an even, welcoming look

Care and Maintenance
✓ Wipe the solar panel surface periodically with a soft damp cloth to remove dust and debris that reduces charging efficiency
✓ Clean the ABS body with a damp cloth — the IP68 construction handles rain and outdoor moisture without issue
✓ If runtime decreases noticeably over time, the battery may need replacement — a standard 1.2V AA nickel-hydrogen rechargeable battery
✓ During extended winter storage, switch each light OFF to preserve battery health
Product Specifications
| Material |
ABS + PVC — white body |
| Solar panel |
2V / 100mA polycrystalline silicon |
| LED |
2835 × 14pcs — ring arrangement |
| Battery |
1.2V AA 300mAh nickel-hydrogen rechargeable |
| Light colours |
Warm White · Cold White |
| Waterproof rating |
IP68 |
| Charge time |
6+ hours direct sunlight |
| Runtime |
Up to 8 hours per full charge |
| Operation |
Automatic dusk-to-dawn sensor |
| Diameter |
4.9 in (124 mm) |
| Total height with spike |
5.7 in (145 mm) |
| Pack options |
4-pack · 8-pack · 12-pack |
What's Included
✓ Solar Ground Lights × selected pack quantity (4, 8, or 12)
✓ Ground spikes (2 per light)